|
Image
|
Description
|
Retail
Price including VAT and delivery
within UK & EU
|
Click to Order |
|
 
|
Recessed
Sensor Fitting Kit
Consisting
of:
|
£10.00 |
|
|

|
Digital Multimeter
Universal multitester
with diode and hFE test. DC voltage 200mV - 1000V (+0.5% f.s) AC voltage
200V - 750V (+1.2% f.s) DC current 200uA - 10A (+1.0% f.s) Resistance
200 - 2m (+0.8% f.s)
|
£18.50 |
|
|

|
6-24 Volt Circuit Tester
6v to 24v circuit tester with 3mm slotted
screwdriver blade. Approximately 75cm (30") of cable with crocodile
clip.
|
£10.00
|
|
|

|
Auto Wire Stripper
Automatic wire stripper fitted with a wire
cutter. Capable of stripping wire up to 22mm
long. Fitted with adjuster for different thickness.
|
£10.00
|
|
|

|
RELAY. Single By-Pass Relay, to protect the electrical system on vehicles with
bulb failure monitoring system, multiplexed wiring or CANBUS.
Click Here to view the installation instructions.
This item
is compatible with all our Parking Sensor Kits.
|
£10.00 |
|
|

|
30SH. Front
Parking Sensor Smart Switch, to automatically power a front parking sensor
kit when reverse gear is engaged and maintain power for approximately 30
seconds following the disengagement of reverse gear.
Click here to view the installation instructions.
This
Smart Switch is compatible with Front & Rear kit Model 4453 all 18xx kits
fitted to the front of vehicles.
|
£15.00 |
|
|

|
Round
Rocker Switch to manually operate front
Parking Sensors.
Dash
mounted switch to enable the manual switching of front parking sensor
kit. Requires 20.4mm hole. Body has a 2mm wide locating lug for which a
slot must be provided in the edge of the hole to prevent rotation.
|
£10.00 |
|
|

|
1SD. Parking Sensor Power
Delay for Automatic Gearboxes, delays the power sent to the Parking Sensor
kit for 1 second after engaging reverse gear. This device is designed to
address an annoying problem where a short beep is emitted from the Parking
Sensor kit when shifting from Park to Drive.
Click here to view the installation instructions.
This item
is compatible with all our Parking Sensor Kits.
|
£15.00 |
|
|

|
VCONV.
24Vdc - 12Vdc 1.1A Voltage Converter
enabling 12Vdc Parking Sensors devices to be powered from a 24Vdc power
supply used in coaches, lorries, motorhomes, American RV's, etc. The
maximum power handling of this module is 1.1A making it suitable for use
with any of our Parking Sensor kits.
This item is
compatible with all our 12Vdc Parking Sensor Kits fitted to 24Vdc
vehicles.
|
£15.00 |
|

|
NFILTER. Noise Filter. Can be fitted
between Parking Sensor CPU and Power supply to filter out high frequency
interference.
This item is
compatible with all our Parking Sensor Kits.
|
£15.00 |
|
|

|
UBB. Under
Bumper fixing bracket for Recessed Sensors.
Ideal
for commercial vehicles, campervans, 4X4s, caravans, trailers and trucks.
|
20mm
Hole
for
"V" Type Sensors
2
Pack: £5.00
3
Pack: £6.00
4
Pack: £7.00
22mm
Hole
for
"S" Type Sensors
2
Pack: £5.00
3
Pack: £6.00
4
Pack: £7.00
|
|